Scaffolding Pipe-Scaffolding Pipe Supplier

Scaffolding Pipe

Weight: Φ48.3*4mm -Per unit 4.37kg/2.937lbs, Φ48.3*3.2mm -Per unit 3.56kg/2.392lbs
Quality standard: EN39/BS1139/AS1163
Finishing: Hot Dipped Galvanized Pipe or Black Finish available
Zinc content: Standard: ≥40 Micron
Pack sizes: 37pcs or 61pcs /per bundle
grade: JISG3444 STK 500 (Φ48.6 x 2.4 thk)
Finishing: Hot Dipped or Pre Galvanized pipe

Inquiry

Send Email

Specification

Specification of Scaffolding Pipe

Size: 0.3m to 6.3m length

Weight: Φ48.3*4mm -Per unit 4.37kg/2.937lbs, Φ48.3*3.2mm -Per unit 3.56kg/2.392lbs
Quality standard: EN39/BS1139/AS1163
Finishing: Hot Dipped Galvanized Pipe or Black Finish available
Zinc content: Standard: ≥40 Micron
End finish: Plain End or Painted available
Pack sizes: 37pcs or 61pcs /per bundle
Other grade: JISG3444 STK 500 (Φ48.6 x 2.4 thk)
Finishing: Hot Dipped or Pre Galvanized pipe

Features of Scaffolding Tubes

1. Easy to use

2. Durability

3. Ease in assembly and dismantling

4. Light in weight

5. Adaptability&Flexibility

6. Cost Effectiveness

Process

Tests

Steel Grade of Raw Material

Scaffolding pipe raw material is steel plate. Only tested past steel plate coil are approved accepted in raw material stock. Raw material testing including chemical composition according to BS1139, physical property of tensile strength, yield strength, elongation.

Welding Line Testing

Scaffolding pipe welding line quality is tested according to ISO3834 and EN1090 CE requirement. While flatten testing is also essential in scaffolding pipe welding line testing.

Finished Scaffolding Pipe Testing

GI scaffolding pipes are tested after galvanizing, while black tube are tested after welding directly. The testing include chemical composition, physical property and flatten. Clients can get mill certificated, test report from us for each batch of material.

Packing & Delivery

Tolerance table

Scaffolding Steel Pipe Tolerances on Dimensions
The tolerance on specified outside diameter is +/-0.5mm;
The tolerance on out of roundness is included in the diameter tolerance;
The tolerance on wall thickness is -10%;
The inside diameter of tubes shall allow insertion of agauge of diameter 37.7mm for aminimu length of 200mm;